LMI Milton Roy P053 - 398 TI Dosing Pump
Hover to Zoom



Dosing Pump LMI Milton Roy P053 - 398 TI

Visco Prima Indonesia merupakan distributor, agen, supplier dan importir terlengkap dan menyediakan berbagai kebutuhan spare part filter untuk keperluan industry dengan price harga yang kompetitif

Single Manual Control
Stroke length is manually adjustable, stroke frequency is fixed.

Capacity Control : Manual , Speed Fixed - Stroke Adjustable

Material : PVC

Capacity : 3,8 liters/hour

Pressure : 7,6 bar

General Description
LMI Roytronic Series P chemical metering pumps shall be positive displacement, Liquifram type pumps that are UL and CUL approved. Output volume shall be adjustable while pumps are in operation from zero to maximum capacity.
Pump Controls
The stroke frequency will be fixed. Stroke length shall be adjustable by a readily accessible dial knob located opposite the liquid handling end.
Drive Assembly
The pump drive shall be totally enclosed with no exposed moving parts. Electronics shall be housed in chemical resistant enclosure at the rear of the pump for maximum protection against chemical spillage. Electrical power consumption shall not exceed 22 watts per hour under full speed and maximum pressure conditions. Pump weight shall not exceed 7.6 lbs (3.5 kg).
Pressure Relief
The LMI 4-Function Valve is recommended with a LiquiPro or AutoPrime Liquid End to provide automatic pressure relief.
Materials of Construction
See Specifications tab. Chemical metering pump housing shall be of chemically resistant glass fiber reinforced thermoplastic. All exposed fasteners shall be stainless steel. Valve seat and seal ring shall be renewable by replacing only the combination seat-seal ring or cartridge valve assembly.
Check Valve, Tubing, Connections
A total of 16 ft (4.8 m) of tubing shall be provided per pump complete with compressing connections (on models with tubing connections). A foot valve with integral one piece strainer shall be provided for the suction line (on non-high viscosity models with tubing connections), and an injection check/back pressure valve with 1/2" NPT male connection for the injection point (on models with tubing connections).

Pastikan anda mendapatkan produk berkualitas dari Visco Prima Indonesia


Untuk keterangan lebih lanjut, silahkan download PDF ini :

phoneHubungi Kami
phone Telepon
Minta Penawaran
Ingin menghubungi kami?
Klik tombol dibawah
Logo IDT